NINJA NJ001

The FITEL NINJA NJ001 Handheld, Single Fiber Fusion Splicer delivers fast and reliable fiber splicing under even harsh environmental conditions. Combining portability and ease of use in a ruggedized body, the NJ001 offers powerful splicing performance with the durability needed for use in the field.

 

While the NJ001 design is compact and low profile, its large battery capacity helps save on time by allowing 100 splicing and heating cycles in one charge. Offering consistent splicing and outstanding ease of use, the NJ001 is suitable for use with all Metro, LAN and FTTx fibers (including ultra-bend insensitive fibers).

Product Features

  • Enhanced Ease of Use – The NJ001 features a proportionately wide splicing chamber for easier fiber loading.When compared with the S123C unit, the NJ001 offers 400% more space around the fiber holders, making this one of the most user-friendly splicers available.
  • Improved Visibility – Three LED lights illuminate the entire splicing chamber with more than 300 Lux. This light intensity improves visibility, making it easier to perform work in low-light environments. In addition, the light on the V-groove is 600% brighter than that of the S123C unit.
  • Industry-First Detachable V-Groove – The NJ001’s V-groove is detachable for easy cleaning and optimal maintenance.
  • Wider splicing chamber for easier fiber loading
  • Three LED Lamps – Enhanced illumination for easier splicing in low-light environments
  • High propulsion motor – A powerful motor with a propulsion of 8N helps ensure stable splicing even for highly rigid cables including drop and indoor cables
  • Ruggedized design – The ruggedized body is designed to endure shocks and impact along with exposure to water and dust
  • Compatibility with Splice-on-Connector (SOC) – The detachable heater clamp allows work with SOC
  • 100 cycles (Splicing and Heating)1
  • Available for ALL Metro/LAN/FTTx fibers, including ultra-bend insensitive fibers
  • Easy maintenance – The industry’s first detachable V-groove allows ease of cleaning and maintenance. The NJ001 also features toolless electrode replacement and a mirror-free alignment system.
  • PC interface software – Easy software upgrades, splice management, program editing and export of splice results
  • Auto Start Function – Heating and splicing processes
  • Drop resistant – 76 cm drop tests from 5 different angles 4
  • Water resistant – Equivalent to IPX2 rating drip proof 4
  • Dust resistant – Equivalent to IP5X rating dust proof 4

Technical Specifications

  • Applicable Fibers: SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653), NZD (ITU-T G.655), BIF/UBIF (Bend Insensitive Fiber ITU-T G.657)
  • Cladding Diameter: 125 μm
  • Coating Diameter: 250 ~ 900 μm
  • Fiber Cleave Length: 5 to 10 mm or 16 mm
  • Average Splice Loss: SM: 05 dB, MM: 0.02 dB, DSF: 0.08 dB, NZD: 0.08 dB, BIF/UBIF: 0.05 dB
  • Splice Time: 13 seconds
  • Heat Time:
    • 17 seconds (40 mm sleeve 5 ), 20 seconds (60 mm sleeve 5 ) (Pre-heat mode 5 )
    • 31 seconds (S922: 40 mm sleeve, S921: 60 mm sleeve) (Regular mode 6 )
  • Splice Programs: 150
  • Heat Programs: 30
  • Automatic Heating Start: Available
  • Applicable Sleeves: 20/40/60 mm
  • Fiber Holder: Tight holder (Loose tube applicable) or Removal fiber holder system
  • Tension Test:96 N
  • Splice Return Loss: 60 dB or more
  • Fiber Image Magnification: 58X
  • Splice Memory: 1500
  • Image Capture Capacity: Last 100 images to be automatically captured + Up to 24 images to be stored permanently
  • Dimension:
    • 124W × 161D × 64.5H mm (not including rubber pad)
    • 139W × 176D × 71H mm (including rubber pad)
  • Weight: 970 g (with battery)
  • Monitor:5” color LCD monitor
  • Propulsion (motor): 8 N (Designed value)
  • Data Output: USB ver. 2.0 mini
  • Battery Capacity7: Typically 100 splice/heat cycles 7
  • Wind Protection: wind velocity of 15 m/s.
  • Operating Temperature: -10° to +50°C (without excessive humidity)
  • Storage Temperature: -40° to +60°C (without excessive humidity)
  • Humidity: 0 to +95% RH (non condensing
  • Power Source: AC input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V without any  change of hardware
  1. In semi-auto splicing mode and regular heating mode
  2. “fis” is a registered trademark of Fiber Instrument Sales, Inc.
  3. Standard operations could be properly carried out after having conducted the above tests. These tests were performed at the Furukawa Electric Lab with no significant damage. This does not guarantee that the machine will always be undamaged under these conditions
  4. These are not necessary?
  5. The heating time may vary depending on the type of sleeves.
  6. The first heating cycle after turning the power on can be longer than the standard heating time.
  7. The number of splicing and heating cycles the machine can perform with a fully charged battery at 20˚C in semi-auto splicing mode and regular heating mode. The number of cycles may vary depending on the battery status and operating conditions.
Product Information Sheet

Specialty Fusion Splicers

Contact Info

Request a Quote
Locate a Distributor in Your Region
Service Request

Standard Package

Item P/N Quantity
FITEL NINJA NJ001 Main body (including battery) NJ001-X-A-0001 1
Hard Carrying Case HCC-03 1
Spare Electrodes ELR-01 1 pair
AC Adapter S978A 1
AC Cable Cord – 1
Electrode Sharpener D5111 1
Cleaning Brush VGC-01 1
User Manual (CD) UMC-01 1
User Manual FTS-347 1

Optional Components

Item P/N Quantity
Cooling Tray CTX-01 1
USB Cable USB-01 1
Battery Pack S946 1
Tight Holder    16 mm Cleave Length 10 mm Cleave Length S712T-016 S712T-010 1 pair 1 pair
Fiber Holder    160 µm coated fiber 250 µm coated fiber 500 µm coated fiber 900 µm coated fiber S712S-160 S712S-250 S712S-500 S712S-900 1 pair 1 pair 1 pair 1 pair
Fiber Holder  Loose Tube Fiber (Left side) Loose Tube Fiber (Right side) S712S-LT-L S712S-LT-R 1 pair 1 pair
SOC Holder Seiko Giken FC/SC ferrule (9 mm) Seiko Giken FC/SC ferrule (5 mm) Seiko Giken LC ferrule (9 mm) Seiko Giken LC ferrule (5 mm) Seiko Giken TOUCH Plus SC (9 mm) Diamond E-2000/F-3000™ LC/SC connector Seiko Giken Cordage (5 mm) Seiko Giken Cordage (9 mm) Diamond Cordage (5 mm) S712C-SGS9-L S712C-SGS5-L S712C-SGL9-L S712C-SGL5-L S712C-SGS9C-R S712C-DM25-L S712C-SGC5-R S712C-SGC9-R S712C-DMC5-R 1 1 1 1 1 1 1 1 1
Drop/Indoor Cable Holders Drop/Indoor Cable Holder Low-friction Indoor Cable Holder S712S-1SM-D S712S-1SM-ST 1 pair 1 pair
Fiber and Cordage Common Holder S712F-CM 1 pair
Smart Fuse Software Interface for Machine SF-01 1

Ordering Information

Code Description
NJ001-1-V1 Splicer with 16 mm Fiber Holder S712T-016
NJ001-2-V1 Splicer with 10 mm Fiber Holder S712T-010
NJ001-2-EX-10-V1 Splicer with cleaver, S712T-010 holder, S211B stripper, S943B battery, wipes and fluid
NJ001-EX-900-V1 Splicer with cleaver, S712S-250 and S712S-900 holders, S211B stripper, S943B battery, wipes and fluid