FITEL S251A Thermal Stripper

The FITEL S251A is a compact, battery-powered thermal stripper for removing the coating from 125 μm optical fibers and fiber ribbons. It is compatible with single fibers and ribbons with coating diameters from 0.20 to 0.40 mm, and handles ribbons of 1 to 12 fibers (up to 16 fibers when the coating diameter is 0.20 mm).

A flat heater design makes the stripper easy to clean and lowers the pulling force, which helps increase splice yield. From power-on, the heater reaches 100 °C at room temperature in about 5 seconds, so the S251A is ready to strip quickly and gives consistent results. Heat and time settings are simple to adjust for each fiber type and working environment, with five heating temperature steps from 80 to 160 °C.

The S251A is equipped with a USB-C connector for convenient charging with portable batteries. Bright LEDs, sound and vibration notifications, and a water-resistant body make it well suited for outdoor operation.

Product Features:

  • Compatible with 200–400 μm single fibers and ribbons
  • Ready to strip in about 5 seconds after power-on (time to reach 100 °C at room temperature)
  • Lower pulling force for increased yield
  • Flat heater design for easy cleaning
  • Five heating temperature steps, from 80 to 160 °C
  • Easy heat and time settings for each fiber type and working environment
  • USB-C connector for convenient charging with portable batteries
  • Bright LEDs, sound and vibration notifications, and water-resistant body for outdoor operation

Technical Specifications:

  • Applicable Fibers- Optical fibers (glass)
  • Cladding Diameter- 125 μm
  • Fiber Count- 1 to 12 (16 for 0.20 mm coating diameter only)
  • Coating Diameter- 0.20 to 0.40 mm
  • Fiber Ribbon Size- 0.20 to 0.40 mm (thickness)
  • Heating Temperature- 80, 100, 120, 140, 160 °C (5 steps)
  • Battery Life- Approx. 10 hours (normal mode), approx. 600 stripping cycles
  • Charging Time- Approx. 3 hours (with power off)
  • Power Supply-
    • DC: 5 V, 9 V 2 A, 9 V 3 A
    • AC: 100-240 V, using the S983A AC adapter
  • Dimensions- 147(W) x 46(D) x 35(H) mm
  • Weight- Approx. 240 g (including battery)
  • Operating Conditions- -10 to 50 °C, max. 95% RH (non-condensing)
  • Storage Conditions- -40 to 60 °C, max. 95% RH (non-condensing)

Standard Package:

Part Number Description
ACC-06-0177 S251A Thermal Stripper

Package includes: S251A main body, S944D battery, AC adapter, VGC-01 cleaning brush, and FTS-B642 quick reference guide.

Accessories and Consumables:

Model Number Description
S2510-X-S-0002-A S251A Spare Blade (1 set)
S2510-X-S-0003-A S251A Hand Strap
S2510-X-S-0004-A S251A Bag for Main Body
S2510-X-S-0001-A S251A USB-C Cable (for Charging)