NorthLab ProView™ Theta LD/XD

Interferometer With Fusion Splicer Control

The ProView Theta interferometer revolutionizes fiber splicing by enhancing standard PM splicers with advanced end face topography and geometry matching capabilities.

 

The ProView Theta is specifically designed to minimize the cleave angle gap for large diameter fibers and effectively match and align complex end face structures prior to splicing.

As the fiber optic industry evolves toward increasingly complex fiber types and structures, demand for versatile splicing equipment has grown. Traditional fusion splicers often struggle to accommodate these advancements. The ProView Theta meets this challenge by functioning as a “third eye” for PM splicers. Connected to the fusion splicer through an external PC, the interferometer analyzes end face structures and geometries to produce a detailed digital template of each fiber. Operators can then digitally align these templates, after which the ProView Theta sends precise rotational commands to the splicer, ensuring optimal theta alignment for flawless splicing.

The ProView Theta is well-suited for aligning and splicing a variety of fiber types, including PM, PCF, airclad, multi-core, and complex geometries such as hexagonal, octagonal, and D-shaped fibers. Additionally, the design encourages prompt operator involvement and supports semi-automated processes, resulting in a flexible, versatile, and future-proof solution.

The Proview Theta is available in two models: LD (125–800 µm) and XD (250–1200 µm) cladding diameters.
The interferometer is compatible with all FITEL S185 PM-type splicers.

Product Features:

  • For fiber cladding diameters:  LD model: 125 to 800 μm, XD model: 250 to 1200 μm
  • 2D and 3D topography
  • Fringe & Inspection mode from PC Controller GUI
  • Very fast inspection time with automatic angle estimation
  • Optional use of PASS/FAIL cleave angle indication
  • Inspection of end-face properties such as flatness, perpendicularity, hackles and contamination
  • Grab and save 2D and 3D images and cleave data

Technical Specifications:

  • Dimensions:
    • 86(W) x 127(D) x 93(H) mm
    • 86(W) x 140(D) x 97(H) mm (incl. focus knob and rubber feet)
  • Weight: 1.2 kg
  • Power Supply: Through USB port
  • PC connection: Super Speed USB (USB 3.0) Type-A with 2 m cable
  • Environment:
    • Operating temperature: 10 °C ~ 40 °C
    • Storage temperature: -20 °C ~ 50 °C
    • Humidity: 5 % ~ 95 % RH (non-condensing)
  • Fiber: LD Model: 125-800 µm, XD Model: 250-1200 µm
  • Field of View: LD Model: ~900 µm, XD Model: ~1500 µm
  • Resolution: 2560 x 1920 (4,92MP)
  • Sensor: CMOS (monochrome)
  • Image file format: JPEG, PNG, TIFF, GIF

System Accuracy and Range:

  • Absolute accuracy*:
    • 03° standard deviation (250 um)
    • 02° standard deviation (400 um)
  • Relative accuracy*: 5% up to 2°
  • Height, peak to valley: 15 µm
  • Angle, 125 µm fiber: up to 5.0°
  • Angle, 220 µm fiber: up to 3.9°
  • Angle, 400 µm fiber: up to 2.1°
  • Angle, 720 µm fiber: up to 1.2° 

* Using software calibration compensation

System Requirements:

  • Computer: PC with Intel i5 or better
  • USB*: One free USB 3.0 port (Super Speed)
  • Memory: Min. 4 GB RAM (16 GB recommended)
  • Disc Space: Min. 100 MB (500 MB recommended)
  • Operating System: Windows 8/8.1/10 64-bit (with .NET Framework 4.8 or later)
  • Graphics card: 3D graphics support (dedicated GPU recommended)
  • Display resolution: 1920 x 1080 (dual monitor system recommended)
  • Input devices: Keyboard and a three-button scroll-wheel mouse (or equivalent) 
*Only use USB 3.0 ports directly connected to the motherboard of the PC (i.e. a port without an internal extension cable).

Standard Packages:

 

Part NumberDescription
ACC-09-0067 LDNorthLab Proview Theta LD Interferometer
ACC-09-0071 LD-DLSNorthLab Proview Theta LD-DLS Interferometer
ACC-09-0068 XDNorthLab Proview Theta XD Interferometer
ACC-09-0072 XD-DLSNorthLab Proview Theta XD-DLS Interferometer

All packages include:

  • ProView Theta LD/XD
  • Theta software
  • Theta Software License Fee, 1 year (Incl. support & software upgrades)*
  • User’s manual
  • Manufacturer’s 1-year parts and labor warranty
*If the Theta software license is not renewed annually, the ProView Theta automatically reverts to standard interferometer software, resulting in the deactivation of all advanced features for profile alignment and fusion splicer control

Accessories and Consumables:

Part NumberDescription
ACC-09-0022FITEL S713 / Fujikura Fiber Holder Platform
ACC-09-0043FITEL S712 Fiber Holder Platform
CON-09-0023Fiber Clamp Shims (100/400/600/800/1000um)